Carbon fibre Tuba Case
Instrument protection
Your tuba is fully suspended within the case and is supported at four points:
1) A removable cushion block at the bottom of the case, secured with Velcro. The height of this block can be adjusted so that the tuba bell is the correct distance below the inside of the case lid.
2) A fixed, adjustable cushion block on the bell-side of the case.
3) A fixed, adjustable cushion block on the narrower main loop of the tuba. The instrument is held between these two blocks and rests on the shaped cushion block in the bottom of the case.
4) An adjustable cushion block on the underside of the case lid.
Wheels
For ease of transport, he case features very high quality shock-absorbing, ball-bearing gel wheels with steel continuous axle running through the case.
Shoulder straps and hip belt
The case is supplied with comfortable and hard-earing, padded leather shoulder straps and a hip belt for backpack style carrying.
Additional storage
There is plenty of additional storage space inside the case.
The Case lid functions as a tuba stand
Simply place the lid on the floor when removed from the case!
Size:
LID = Egg shape/oval W= 55cm (21.71inches), L= 68cm (27inches)
Height of cases including shallow lid = 105cm (41.5 inches)
Height of Case including Deep lid = 112.5cm (44.5 inches)
Narrow bottom end of case: Oval/egg shape = W = 36cm (14 1/3 inches) L= 50cm (19.5 inches)